Renesas MCU Board for PC4400 Emulator System M34282T5-OPT Información técnica descargar pdf (Pagina 22)

( 20 / 38 )

4.6 Connecting MCU Board to Target System

Figure 4.7 shows the connection to the target system using the 20-wire normal-pitch cable.

Connect the M34282T5-OPT with the IC socket for 2.54-mm-pitch 20-pin DIP (e.g. IC26-2003-GS4:

made by Yamaichi Electronics Co., Ltd.) on the target system using the included 20-wire normal-pitch

flat cable.

However, the M34282T5-OPT cannot be connected to the foot pattern of the MCU package (20P2N-

A or 20P2E/F-A).

For this connection, you need three accessory parts listed below:

(1) 40-wire half-pitch cable (40 cm)

(2) Pitch converter board PCA4029

(3) 20-wire normal-pitch cable (10 cm)

Table 4.9 lists the connector signal assignments of the 20-wire normal-pitch cable. Figure 4.8 shows

the pin layout of the 20-wire normal-pitch cable.

Figure 4.7 Connecting target system

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Sin comentarios

Renesas MCU Board for PC4400 Emulator System M34282T5-OPT Información técnica Pagina 22