Renesas M3T-ICC740 Manual de usuario

To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology C

Chapter 5. Building the Tutorial Project The tutorial project build settings have been pre-configured in the tool-chain options. To view the tool ch

5.2. Connecting the debugger For this tutorial it is not necessary to provide an external power supply to the board. The power will be obtained from

• The Flash Memory write program will be downloaded to the target. • The Output window in High-performance Embedded Workshop will show ‘Connected’

Chapter 6. Downloading and Running the Tutorial Once the code has been built in High-performance Embedded Workshop it needs to be downloaded to the

• Place a breakpoint at the call to main(); Breakpoints can only be set when the E8a is connected to the target and the module is downloaded. Breakpo

• Right click on the FlashLEDs(); function and select ‘Go To Cursor’ as illustrated. The code will execute to the selected line and stop. An automat

• Press ‘CTRL-B’ to open the breakpoint window. This dialog is not available if user debugged using eventpoints as suggested at top of page 10. ‘CTRL

The dialog will close and a new pane will open in the workspace containing the variable. It is possible to see that the string has been successfully

Chapter 7. Project Files 7.1. Standard Project Files The Renesas Starter Kit tutorials are configured so that it is possible to provide the same tu

7.1.2. Board initialisation code (hwsetup.c / hwsetup.h) There are four common stages to the configuration of the microcontroller device. The code t

Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to chang

7.1.3. Main tutorial code (main.c / main.h) The main tutorial code is common to all tutorial projects. The display initialisation and string display

Chapter 8. Additional Information For details on how to use High-performance Embedded Workshop, refer to the High-performance Embedded Workshop manu

Renesas Starter Kit for 38D5 Tutorial Manual (for M3T-ICC740) Publication Date Rev.2.00 Aug.10,2007 Published by:

1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 JapanRenesas Starter Kit for 38D5REJ10J1558-0200Tutorial Manual (for M3T-ICC740)

Renesas Starter Kit for 38D5Tutorial Manual (for M3T-ICC740)User’s ManualRev.2.00 2007.08RENESAS SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER740 FAMILY

Table of Contents Chapter 1. Preface...

Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of this d

Chapter 2. Introduction This manual is designed to answer, in tutorial form, the most common questions asked about using the Renesas Starter Kit: Th

Chapter 3. Tutorial Project Workspace The workspace includes all of the files for two build configurations. The tutorial code is common to both the

Chapter 4. Project Workspace 4.1. Introduction High-performance Embedded Workshop is an integrated development tool that allows the user to write, c

The next dialog presents the three types of example project available: 1. Tutorial: This is the one of interest at this time; the code is explained l