Renesas FLASH Development Toolkit 3.07 Manual de usuario descargar pdf (Pagina 37)

3.4.4

Device Settings

Enter values for the device settings; enter the input clock, then select the main and peripheral clock

multipliers from the drop-down lists, and click the ‘Next’ button.

Figure 3-5 Device Settings

Supplementary:

1. Clock Setting

Allow selection of the device external clock (default) or one or more of the device internal clock speeds.

2. CPU Crystal Frequency

Enter the frequency of the CPU clock or the crystal generator. This can be specified up to 4 decimal

places. The target device, the kernel and the Clock Mode determine the valid range.

3. Clock Mode

If enabled, select the required value from the drop-down list.

4. Multiplier for CKM

If enabled, select the input clock multiplier for the master (system) clock. The available options depend

upon the target device, the kernel and the Clock Mode.

5. Multiplier for CKP

If enabled, select the input clock multiplier for the peripheral clock. The available options depend upon

the target device, the kernel and the Clock Mode.

Note To enter the clock mode, input clock, and multipliers, refer to the device hardware manual and/or

the target board manual to confirm the values required.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 145 146

Sin comentarios

Renesas FLASH Development Toolkit 3.07 Manual de usuario Pagina 37