Renesas Single-Chip Microcomputer M37900T2-RPD-E Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
( 35 / 52 )
IMPORTANT
Note on Self-check:
If the self-check does not result normally (excluding target status errors), the
emulation pod may be damaged. Contact your local distributor.
(2) If an Error is Detected in the Self-check
If the self-check does not result normally (ERROR 1 and ERROR 2 in Figure 4.3), check the
following.
•Check the connection of the emulation pod and the PC4701.
• Check the connection of the emulation pod and the pod probe.
•Redownload the proper firmware.
Check if the switches in the pod probe are set same as the factory-setting (refer to the user's
manual of the pod probe).
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Comentarios a estos manuales

Sin comentarios