Renesas SH7210 Series Manual de usuario descargar pdf (Pagina 39)

Notes: 1. The external bus trace interface connector installed on the user system must be as close

to the MCU as possible.

2. Wiring pattern of clock lines (CKO)

The followings are notes on wiring of clock lines for the E200F trace interface signals.

Take them into consideration when designing the user system to embed suitable clock

lines.

(a) Clock lines must be as short as possible.

(b) Clock lines must be surrounded by the GND pattern for protection so that the

signals will be of low-impedance.

of GND/VCC so that the signals will be of low-impedance.

(d) To prevent affect by the crosstalk noise, other signal patterns must not be

embedded along with the clock lines.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 89 90

Sin comentarios

Renesas SH7210 Series Manual de usuario Pagina 39