Renesas Pod Probe for 7906 Group MCUs M37906T-PRB Información técnica descargar pdf (Pagina 25)

( 23 / 40 )

With the 7900 Series emulator system, the internal flash ROM of the emulator MCU is used as an

emulation memory.

As write/erase iterations to the internal ROM are limited, it is necessary to replace the MCU board

(M37906T-PRBM) depending on its life span.

How to replace the MCU board is shown in Figure 3.4.

Figure 3.4 Removing MCU board M37906T-PRBM

(1) Unscrew the four screws of M37906T-PRB.

(2) Remove the M37906T-PRBM from the M37906T-PRB.

In this time, lift off the M37906T-PRBM horizontally.

Otherwise, the connector may cause a break.

CAUTION

When Connecting Pod Probe:

• Be sure to turn off the power before making connections. Otherwise, the internal

circuits may be damaged.

• The small connectors (J3 and J4) of the M37906T-PRB are guaranteed for only 20

insertion/removal iterations.

• The small connectors (J1 and J2) of the M37906T-PRBM and those (J5 and J6) of

the M37906T-PRB are guaranteed for only 50 insertion/removal iterations.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Sin comentarios

Renesas Pod Probe for 7906 Group MCUs M37906T-PRB Información técnica Pagina 25