Renesas Emulator Debugger M16C PC4701 Manual de usuario descargar pdf (Pagina 32)

M3062PT3-RPD-E User’s Manual 2. Setup

REJ10J0040-0600 Rev.6.00 July 01, 2006 Page 32 of 104

2.8.2 Connecting to a 100-pin LCC socket

Figure 2.10 shows how to connect a 100-pin LCC socket (IC61-1004-051 of Yamaichi Electronics Co., Ltd.) on the user

system to the M30800T-PTC (included).

(1) Attach the CN2 side of the M30800T-PTC to the CN2 side of the package converter board connected to the emulation pod

probe.

(2) Attach the M30800T-PTC to the 100-pin LCC socket.

100- pin LCC socket

CN 2 side

(1)

No . 1 pin

(2)

M 30800T- PTC

User system

Package converter board

Tip of emulation pod probe

Figure 2.10 Connecting to a 100-pin LCC socket

CAUTION

Note on Connecting the User System:

z Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulation

pod.

IMPORTANT

Notes on Connectors of the Converter board:

z The connectors of the M30800T-PTC are guaranteed for only 50 insertion/removal iterations.

z The connectors of the IC61-1004-051 are guaranteed for only 20 insertion/removal iterations.

z For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Sin comentarios

Renesas Emulator Debugger M16C PC4701 Manual de usuario Pagina 32