Renesas Emulator System E8 Información técnica descargar pdf (Pagina 36)

(2) The [Emulator mode] dialog box will appear.

Figure 6.11 [Emulator Setting] Dialog Box

In the [Device] menu, the name of the device mounted on the user system should be specified.

Here, select [R5F211B4] which is installed on the CPU board.

Select the [Erase Flash and Connect] radio button for [Mode].

Click [Power Target from emulator. (MAX 300mA)] for [Power supply] and select 5.0 V required for the CPU board.

Then, click the [Next] button.

(3) The [Firmware Location] dialog box will appear. Specify the assignment area for the E8 firmware as the area that is

not in the user system. In this guide, the E8 firmware is assigned in the user flash-memory area.

Figure 6.12 Setting an Address Assigned in the E8 Firmware

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 54 55

Sin comentarios

Renesas Emulator System E8 Información técnica Pagina 36