Renesas FP-144L Información técnica descargar pdf (Pagina 30)

6. Level-shift circuits with AVcc0, AVcc1, and Vref are mounted on the user system interface

cable, as shown in figure 13. At shipment, the jumper pin is inserted in the side of pins 1 and

2 of the P4 short connector. For details on the differences between the target MCU and the

emulator, refer to the H8SX/1650 E6000H Emulator User's Manual (HS1650EPH60HE). For

the ranges of input voltages of AVcc0, AVcc1, and Vref, refer to the H8SX/1544 Group

Hardware Manual.

CAUTION

Insert the jumper pin in the P4 short connector so that

the higher voltage between AVcc0 and AVcc1 is selected.

Select either AVcc0 or AVcc1 when their potentials are

the same. Do not use the emulator without jumper pins.

1 2 ... 25 26 27 28 29 30 31 32 33 34

Sin comentarios

Renesas FP-144L Información técnica Pagina 30