Renesas H8S/2276 Manual de usuario descargar pdf (Pagina 178)

158

(7) To enable the event condition that has been set, uncheck the [Free Trace] check box on the [General] page.

This will add pages [1] to [4] (see figure 6.45, [Trace Acquisition] dialog box).

(8) Select page [1] and click the [Range] radio button in the [Conditions] group box. This will display the [Range

Event] combo box and the [Edit…] button (see figure 6.46, [Trace Acquisition] dialog box).

(9) Click the [Range Event] combo box to select the event you have registered. The event is now enabled. Click

the [OK] button to complete the trace setting.

Figure 6.52 [Trace Acquisition] Dialog Box (Setting Completed)

(10) Make the setting such that the break occurs after the instruction at the address on the line that has ‘p_sam-

>s0=a[0];’ within the tutorial function (H’00001082 in this example) (for details on this, refer to

section 6.15.1, Software Break Function).

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 235 236

Sin comentarios

Renesas H8S/2276 Manual de usuario Pagina 178