Renesas TFP-144 Información técnica descargar pdf (Pagina 10)

2.1.2 Connecting EIO Board 2 to Emulator

1. Remove four screws at the side of the emulator station.

2. Pull up and remove the cover of the emulator casing.

3. Insert connector P5 of EIO board 2 into connector P5 in the emulator station.

4. Fasten EIO board 2 with the provided two screws (M2.6

× 6 mm).

5. Set up the coaxial cable, which has been connected to EIO board 2, into a gutter of the emulator

station.

6. Set the cover of the emulator station and fasten four screws.

E6000

EIO board 2

connector P5

of EIO board 2

connector P5 of

emulator station

Figure 3 Connecting User System Interface Cable to Emulator Station (2)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 28 29

Sin comentarios

Renesas TFP-144 Información técnica Pagina 10