Renesas Emulator System E8 Manual de usuario descargar pdf (Pagina 39)

3.5 Connecting the Emulator to the Host Computer

This section describes how to connect the emulator to the host computer. For the position of each

connector of the emulator, refer to section 3.2, Emulator Hardware Configuration.

Notes: 1. When [Add New Hardware Wizard] is displayed, select the [Search for the best driver

for your device. (Recommended)] radio button and then the [Specify a location] check

box to select the path to be searched for drivers. The location must be specified as

<Drive>:\DRIVERS. (<Drive> is the CD drive name.)

2. Be sure to install the emulator’s debugger before putting the emulator in place.

WARNING

Always switch OFF the emulator product and the user system

before connecting or disconnecting any CABLES except for

the USB interface cable. Failure to do so will result in a FIRE

HAZARD and will damage the user system and the emulator

product or will result in PERSONAL INJURY.

The USER PROGRAM will be LOST.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 165 166

Sin comentarios

Renesas Emulator System E8 Manual de usuario Pagina 39