Renesas Single-Chip Microcomputer M306NKT3 Manual de usuario descargar pdf (Pagina 122)

106

9.1.2 AutoDisconnect

This forces FDT to automatically disconnect after programming, so that the user does not need to press

the Disconnect button.

9.1.3 Readback Verify

This option controls whether FDT automatically performs a read and compare operation after

programming. The default setting is taken from the project setting (“Readback Verification” on the

Programmer tab of the Project Properties window), but the user can override the default by selecting

this menu item.

9.1.4 Request Checksum

This option controls whether FDT automatically performs a checksum request operation after

programming. The setting is remembered between sessions.

9.1.5 Erase Device Before Program

This option controls whether FDT automatically performs an erase operation before programming the

device. This will erase all blocks in all memory areas prior to programming. The setting is remembered

between sessions.

9.1.6 Security Protection

This option controls whether FDT should security protect QzROM devices as it disconnects. Select

“Automatic” to always protect the device at disconnection. Select “Prompt” to query the user what to

do and select “None” to never protect the device at disconnect. NB – a protected device cannot be

reconnected to.

9.1.7 Field Programming->Run Published File…

Unpackage an .fpf file and use it in Simple Interface Mode.

9.1.8 About…

Shows the About box.

9.2 Dialog Controls

9.2.1 Back to Project

This returns to the full FDT view. This will be disabled if the user currently logged in to FDT does not

have the ‘FDT:Project Edit’ access. [see Chapter 5 for details]

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 146 147

Sin comentarios

Renesas Single-Chip Microcomputer M306NKT3 Manual de usuario Pagina 122