Renesas M30220T-PRB Información técnica descargar pdf (Pagina 18)

( 16 / 36 )

3.3 Connecting M30200T-RPD-E

The emulation pod for M30220 and M30221 Group MCUs consists of the M30200T-RPD-E and the

M30220T-PRB. Figures 3.3 and 3.4 show how to connect the M30220T-PRB pod probe, and how

to remove it, respectively.

Figure 3.4 Removing the M30220T-PRB pod probe

CAUTION

Notes on Connecting the Pod Probe:

• Be sure to turn off the power before making connections. Otherwise, the internal

circuits may be damaged.

• The small connectors (J3 and J4) of the M30220T-PRB are guaranteed for only 50

insertion/removal iterations.

• The small connectors (J3 and J4) of the FLX64-PRB and the small connectors (J1

and J2) of the M30220T-PRB are guaranteed for only 50 insertion/removal iterations.

Figure 3.3 Connecting the M30220T-PRB pod probe

(1) Attach the J1 and J2 connectors of the M30220T-

PRB to the J3 and J4 connectors of the FLX64-PRB

respectively.

(2) Secure the FLX64-PRB with the included two screws.

(1) Unscrew the two screws of the M30220T-PRB.

(2) Lift off the M30220T-PRB from the FLX64-PRB.

Pull the M30220T-PRB straight down carefully.

Applying a twist to them may cause damage to the

connectors.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Sin comentarios

Renesas M30220T-PRB Información técnica Pagina 18