Renesas SH7641 Información técnica descargar pdf (Pagina 39)

6. The [E10A Driver Details] dialog box is displayed. With the [Driver] combo box, select the

driver to connect the HDI with the emulator. [Interface] displays the interface name of the PC

interface board to be connected, and [Channel] displays the interface to which the board is

connected. Once the driver is selected in the [E10A Driver Details] dialog box, this dialog

box is not displayed when the HDI is run next time. (This procedure will not be executed by

target devices.)

Figure 2.8 [E10A Driver Details] Dialog Box

• With the [Driver] combo box, select the driver to connect the HDI with the emulator.

• [Interface] displays the interface name of the card emulator to be connected, and [Channel]

displays the interface to which the board is connected.

[Driver] combo box: Select [E10A PC Card Driver] to use the PCMCIA card emulator.

Select [E10A PCI Card Driver] to use the PCI card emulator. For details,

refer to table 6.3 in section 6.5.1, Emulator Driver Selection.

[Interface] combo box: Select [PC Card] to use the PCMCIA card emulator.

[PCI] is displayed to use the PCI card emulator. (If the driver is not

installed, the [PC Card] or [PCI] is not displayed.)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 249 250

Sin comentarios

Renesas SH7641 Información técnica Pagina 39