Renesas H8S/2378F Información técnica Pagina 37

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 170
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 36
13
Notes: 1. To connect the signals output from the connector, refer to the MCU pin
alignment.
2. To remove the user system interface cable from the user system, pull the tab
on the connector upward.
3. The range of communications that the emulator operates at is different
according to the MCUs used.
4. Connect the signals from the connector as shown in section 6.2, Pin
Arrangement of the Hitachi-UDI Port Connector.
Vista de pagina 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 169 170

Comentarios a estos manuales

Sin comentarios