Renesas H8S/2378F Información técnica descargar pdf (Pagina 40)

The [E10A Driver Details] dialog box is displayed. With the [Driver] combo box, select the

driver to connect the HDI with the emulator. [Interface] displays the interface name of the PC

interface board to be connected, and [Channel] displays the interface to which the board is

connected. Once the driver is selected in the [E10A Driver Details] dialog box, this dialog

box is not displayed when the HDI is run next time. (This procedure will not be executed by

target MCUs.)

Figure 2.7 [E10A Driver Details] Dialog Box

•

With the [Driver] combo box, select the driver to connect the HDI with the emulator.

•

[Interface] displays the interface name of the card emulator to be connected, and [Channel]

displays the interface to which the board is connected.

[Driver] combo box: Select [E10A PC Card Driver 5] to use the PCMCIA card emulator.

Select [E10A PCI Card Driver 5] to use the PCI card emulator. For

details, refer to table 6.3 in section 6.4.1, Emulator Driver Selection.

[Interface] combo box: Select [PC Card] to use the PCMCIA card emulator.

Select [PCI] to use the PCI card emulator. (If the driver is not

installed, the [PC Card] or [PCI] is not displayed.)

•

Click the [Close] button.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 169 170

Sin comentarios

Renesas H8S/2378F Información técnica Pagina 40