Renesas M16C/6V Información técnica descargar pdf (Pagina 46)

M306V8T-EPB User’s Manual 3. Usage (How to Use the Emulator Debugger)

REJ10J0777-0100 Rev.1.00 2005.08.01 Page 44 of 90

2. Specifying the communication interface

Specifying the communication interface

(LPT communication)

- For selecting the LPT communication, click the radio

button “LPT” of the MCU tab.

- For the Type area, specify the LPT interface

communication mode to be used.

- Specify the I/O address of the parallel port at the I/O

address area.

- For BIOS setup, the following addresses are

available.

- 378h

- 278h

Specifying the communication interface

(LAN communication)

- For selecting the LAN communication, click the radio

button “LAN” of the MCU tab.

- Specify the IP address of the emulator at the IP

address area.

- Specify the IP address by one byte of decimal number

separating each four bytes with a period.

- Specify the port number at the Port area.

Specifying the communication interface

(USB communication)

- For selecting the USB communication, click the radio

button “USB” of the MCU tab

- The emulators connected by USB cable are shown at

Serial No. area.

- Select the serial No. of the emulator you are going to

connect.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 91 92

Sin comentarios

Renesas M16C/6V Información técnica Pagina 46