Renesas Emulation Pod M306H2T-RPD-E Información técnica descargar pdf (Pagina 37)

( 35 / 76 )

3.3 Selecting Clock Supply

There are two ways to supply a clock to the MCU, using the oscillator circuit of the emulation pod

or using the oscillator circuit on the target system. Table 3.5 lists the factory-settings of each clock

supply.

Table 3.5 Clock supply to the MCU

IMPORTANT

Notes on Changing the Clock Supply:

• The clock supply can be set by the Init dialog box when starting up the emulator

debugger or inputting CLK command on the script window.

• For XCIN-XCOUT , it is necessary to set switches in the emulation pod. For details, refer

to "3.2 Setting Switches and Pullup Resistors" (page 29).

Clock Description Display of emulator debugger Default setting

IN-XOUT

XCIN-XCOUT

Internal oscillator circuit of emulation pod

(OSC-3: 10 MHz)

Target system

Internal oscillator circuit of emulation pod

(OSC-2: 32.768 kHz)

Target system

Internal

External

Internal

Yes

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 77 78

Sin comentarios

Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 37