Renesas Emulator Debugger M16C PC4701 Manual de usuario descargar pdf (Pagina 29)

( 29 / 52 )

Figure 3.10 Removing pod probe M301xxT-PRB

(1) Unscrew the two screws of the M301xxT-PRB.

(2) Remove the M301xxT-PRB from the FLX64-PRB. In

this time, lift off the M301xxT-PRB horizontally.

Otherwise, the connector may cause a break.

CAUTION

When Connecting the Pod Probe:

• Be sure to turn off the power before making connections. Otherwise, the internal

circuits may be damaged.

• The small connectors of the M301xxT-PRB (J1 and J2) and FLX64-PRB (J3 and J4)

are guaranteed for only 50 insertion/removal iterations.

3.4 Connecting the Pod Probe

The emulation pod for the M16C/10 Series MCUs consists of the two products, the M30100T-RPD-

E emulation pod main unit and the M301xxT-PRB pod probe ("x" denotes number). Figures 3.9 and

3.10 show how to connect the M301xxT-PRB and how to remove it, respectively.

Figure 3.9 Connecting pod probe M301xxT-PRB

(1) Connect connectors J1 and J2 of the M301xxT-PRB to

connectors J3 and J4 of the FLX64-PRB.

(2) Fix the FLX64-PRB by the two screws.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

Sin comentarios

Renesas Emulator Debugger M16C PC4701 Manual de usuario Pagina 29