Renesas R8C/17 Manual de usuario descargar pdf (Pagina 4)

QDK™

R8C/Tau-NC30

www.state-machine.com/m16c

The actual hardware/software used to validate this QDK is described below (see

Figure 1):

1. Renesas R8C/Tau evaluation board with built-in E8 In-Circuit Debugger.

2. High Performance Embedded Workshop 4.04 (HEW4)

3. Renesas NC30 compiler v5.44.

4. QP/C v4.0.01 or higher.

As shown in

Figure 1, the Renesas TAU Starter Kit Plus contains the TAU board and the E8 In-

Circuit Debugger that connects directly to the host development workstation via the provided USB

cable. The USB connection also powers up the board, so no additional power is required. This QDK

has been tested with the R8C Tiny M3026FA8 device with 2KB of RAM and 32KB of onboard flash.

However, the described port should be applicable to even the smallest R8C Tiny devices.

1.1 What’s Included in the QDK?

This QDK provides the QP port to R8C with the Renesas HEW4 IDE and NC30 compiler, the Board

Support Package (BSP) and two versions of the Dining Philosopher Problem (DPP) example applica-

tion described in the Application Note “Dining Philosopher Problem” [QL AN-DPP 08].

1. DPP with the cooperative “Vanilla” kernel; and

2. DPP with the preemptive run-to-completion QK kernel.

1.2 Licensing QP

The Generally Available (GA) distribution of QP™ available for download from the www.state-

machine.com/downloads website is offered with the following two licensing options:

• The GNU General Public License version 2 (GPL) as published by the Free

Software Foundation and appearing in the file

GPL.TXT

included in the packag-

ing of every Quantum Leaps software distribution. The GPL open source li-

cense allows you to use the software at no charge under the condition that if

you redistribute the original software or applications derived from it, the com-

plete source code for your application must be also available under the condi-

tions of the GPL (GPL Section 2[b]).

• One of several Quantum Leaps commercial licenses, which are designed for customers who

wish to retain the proprietary status of their code and therefore cannot use the GNU General

Public License. The customers who license Quantum Leaps software under the commercial li-

censes do not use the software under the GPL and therefore are not subject to any of its terms.

For more information, please visit the licensing section of our website at:

www.state-

machine.com/licensing

2 of 26

1 2 3 4 5 6 7 8 9 ... 27 28

Sin comentarios

Renesas R8C/17 Manual de usuario Pagina 4