Renesas FLASH Development Toolkit 3.07 Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 49
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
CellCom/FreeSpeak Firmware Update Procedures
Rev: 6.05 VGC Part No.- 810372Z-MAN-6 Page 18 of 49
7) After the DECT is upgraded. Turn off the Antenna, disconnect the power and
remove the jumpers from the LK2 and LK4.
8) Check that Jumper LK1 is shorted as this activates the watchdog.
9) Connect a terminal emulator (i.e. HyperTerminal) set at 19200,8,N,1.
10) Power up check that the SW versions are correct.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 48 49

Comentarios a estos manuales

Sin comentarios