Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario descargar pdf (Pagina 28)

*All brand names and product names are trademarks or registered trademarks of their respective companies.

Rev.1.00 2004.06 Page 28 of 135

M37532T-PTC

Converter for Connecting 42-pin 1.778mm-pitch SDIP to a 40-pin

Narrow-pitch Connector (for 7532 and 7534 Groups)

REJ01J0001-0100Z

Rev.1.00

2004.04.16

Function

This board converts connectors from the 42-pin 1.778mm-pitch

SDIP (42P4B) for the 7532 and 7534 Groups of Renesas 8-bit

MCUs to a 40-pin narrow-pitch connector.

Application

Connect this converter and the dummy IC M3T-SSOP36B-450

for the 36-pin 0.8mm-pitch SSOPs or the conversion board

M37530T-PTCB for the 32-pin 0.8mm-pitch LQFPs that is

mounted on the target system. Then connect an emulator MCU

(e.g., M37532RSS) to the converter.

Dimensions

50.0(D)×30.0(W)×17.0(H)mm

[Ordering Information] See Appendix H "Ordering Information".

REJ01J0001-0100Z

Rev.1.00

2004.04.16

Function

The emulation pod (M37515T-RPD) for the 7515 Group of

Renesas 8-bit MCUs has a 64-core flexible cable board (FLX64)

attached at the probe tip. Therefore, this board is used to convert

the 64-pin compatible probe tip to a 42-pin compatible pin

assignment for the 3850 Group.

Application

Connect this board and the direct dummy IC

(M3T-DCT42B-450) for 42-pin 0.8mm-pitch SSOP (42P2R-A)

that is mounted on the target system. Then connect the tip of the

emulation pod (M37515T-RPD) to the board.

Dimensions

25.0(D)×30.0(W)×10.0(H)mm

[Ordering Information] See Appendix H "Ordering Information".

M3T-FLX-DCT503

Board for Converting Pin Assignments to Connect the M37515T-RPD

(for 7515 Group)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 134 135

Sin comentarios

Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario Pagina 28