Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario descargar pdf (Pagina 98)

*All brand names and product names are trademarks or registered trademarks of their respective companies.

Rev.1.00 2004.06 Page 98 of 135

REJ01J0001-0100Z

Rev.1.00

2004.04.16

Function

The SEAL100FP is a board for converting the foot pattern of an

MCU with a 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC

(100D0) package to the standard pitch. Also, this board converts a

100P6S-A or 100D0 IC socket foot pattern to the standard pitch.

Application

The SEAL100FP is a standard pitch converter that is sealed on its

reverse side. It is used to connect an MCU or IC socket with a

100P6S-A or 100D0 package to a standard-pitch universal board,

etc. Since there is a mounting pattern for flat packages on the board,

it allows mask-ROM or PROM MCUs or 100-pin QFP/LCC IC

sockets to be mounted in place directly.

Dimensions

50.80(D)×43.18(W)×0.17(T)mm

Foot Pattern Reference Dimensions

[Ordering Information] See Appendix H "Ordering Information".

SEAL100FP

Sealed Conversion Board for Converting from 100-pin 0.65mm-pitch QFP

(100P6S-A) or LCC (100D0) to 100-pin Standard Pitch

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 134 135

Sin comentarios

Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario Pagina 98