Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario descargar pdf (Pagina 70)

*All brand names and product names are trademarks or registered trademarks of their respective companies.

Rev.1.00 2004.06 Page 70 of 135

REJ01J0001-0100Z

Rev.1.00

2004.04.16

Function

This accessory tool connects an emulation pod and the target. It

can be mounted on the same foot pattern as the MCU housed in

the 42-pin 0.8mm-pitch SSOP (42P2R-A) package.

Attaching Procedure

This converter can be used during debugging and board-mounted

evaluation in common.

When debugging

(1) Mount this dummy IC on the foot pattern.

(2) Mount a converter (e.g. M3T-FLX-DCT503) on top of (1).

(3) Then connect the emulation pod to the connector provided on

the converter.

Also, when using an emulator MCU housed in the 42-pin

1.778mm-pitch SDIP (42P4B or 42S1B-A), use the converter

M3T-42DIP-DMS between the MCU and the M3T-DCT42B-450.

During board-mounted evaluation

Attach the converter M3T-42DIP-DMS to the dummy IC

(M3T-DCT42B-450) on the target system.

* : Position of No. 1 pin

* When using the emulation pod M37515T-RPD, the converter

M3T-FLX-DCT503 is required.

Dimensions

① denotes pin numbers on the M3T-DCT42B－450.

denotes pin numbers of the top of a connector.

Symbol Term Dimensions [mm]

A Fitting height 5.0

D Package length 11.8

E Package width 17.5

e Interval in row of pins 0.8

Foot Pattern Reference Dimensions

See Appendix D "Reference Dimensional Drawings for SSOP

Package Foot Pattern Made by Matsushita Electric Works, Ltd."

[Ordering Information] See Appendix H "Ordering Information".

M3T-DCT42B-450

Direct Dummy IC for 42-pin 0.8mm-pitch SSOP

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 134 135

Sin comentarios

Renesas Emulation Pod M3062PT3-RPD-E Manual de usuario Pagina 70