
*All brand names and product names are trademarks or registered trademarks of their respective companies.
Rev.1.00 2004.06 Page 30 of 135
M38C29T-64LCA
Converter from 100-pin RFS Type Emulator MCU to 64-pin 0.8mm-pitch
QFP (for 38C1, 38C2, 38K0 and 38K2 Group of 38000 Series)
REJ01J0001-0100Z
Rev.1.00
2004.04.16
Function
The M38C29T-64LCA is a board for connecting the 100-pin RFS
type emulator (M38C13RLFS, M38C29RLFS, M38K09RFS and
M38K29RFS) to the foot pattern of 64-pin 0.8mm-pitch QFP
(64P6U-A).
Attaching Procedure
(1) Insert the RFS type emulator MCU to the socket on the
M38C29T-64LCA.
(2) Mount the LCC socket (option) on the foot pattern on the
target system.
(3) Connect this board to the LCC socket with a connector under
this board.
Dimensions
70.0(D)×48.7(W)×17.5(H)mm
[Ordering Information] See Appendix H "Ordering Information".
REJ01J0001-0100Z
Rev.1.00
2004.04.16
Function
The M3T-28DP-WS is a converter for connecting the
emulation pod for PC4701 to the RSS type emulator MCU
(M3XXXXRSS, M3XXXXERSS, and M3XXXXRLSS).
Application
Use the M3T-28DP-WS to connect the 30-pin narrow-pitch
probe of emulation pod to the M3T-28DP-WS's connector.
Insert it into an RSS type emulator MCU.
Since the M3T-28DP-WS has two connectors mounted on its
board, you can connect the emulation pod probe to the target
without worrying about the target MCU's up and down
directions.
The M3T-28DP-WS is a standard equipment of the emulation
pod for PC4701 system.
Dimensions
35.0(D)×18.0(W)×14.0(H)mm
* PC4701 is a generic name representing the PC4701U, PC4701M,
PC4701HS, PC4701L, PC4700H and PC4700L. Production of the
PC4701M, PC4701HS, PC4701L, PC4700H and PC4700L has been
discontinued.
M3T-28DP-WS
Converter for Connecting Emulator Probe to RSS Type Emulator MCU
(for PC4701 system)
[Ordering Information] See Appendix H "Ordering Information".
Comentarios a estos manuales