Renesas Single-Chip Microcomputer M37531T-ADS Manual de usuario descargar pdf (Pagina 33)

M38000T2-CPE User’s Manual 2. Setup

REJ10J0301-0400 Rev.4.00 March 01, 2006

Page 33 of 78

Table 2.4 Error LED display in the self-check and how to remedy it (2/2)

: ON

: OFF

: Blinking

Example

POWER CLOCK RESET RUN

Problem & Remedy

The emulator system is not working properly.

- The emulator or emulator MCU may be damaged. Contact your local distributor.

IMPORTANT

Notes on the Self-check:

z Be sure to connect the user system before executing the self-check.

z If the self-check does not result normally, the emulator or emulator MCU may be damaged. Then, contact your

local distributor.

z Depending on the MCU type, the registers will be altered only once after power-on. In that case, temporarily

turn off the power for the emulator system and user system after self-check has finished normally and then turn

it back on again.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 77 78

Sin comentarios

Renesas Single-Chip Microcomputer M37531T-ADS Manual de usuario Pagina 33