Renesas User System Interface Board HS7047ECH61H Manual de usuario descargar pdf (Pagina 23)

User Manual: RENESAS Flash Programmer

23 www.ngxtechnologies.com

(6) Execute the [Program] command

Step 1: Click the [Microcontroller] menu and select the [Program] command. A check mark is then

placed on the left of the command, and the command is assigned to the Start button.

Figure 4-15. Main Window

Step 2: After clicking the Start button, execute the [Program] command for R5F562N8B.

Remarks

1. When necessary, insert the target microcontroller (microcontroller to be programmed) into the

program adapter, then execute the [Program] command.

2. When supplying VDD power to the target system, first turn off the power, connect the target system

(for programming), and then turn on the power and execute the [Program] command.

3. When the [Program] command is executed, programming is performed after the block with data is

Erased. To erase all blocks, set [All Erase Before Program] in the [Flash Program Options] category

in the [Other Settings] tab of the [List of Settings] dialog box to “True.”

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Sin comentarios

Renesas User System Interface Board HS7047ECH61H Manual de usuario Pagina 23