Renesas H8S/2628 Información técnica Pagina 397

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 430
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 396
369
8.2.6 HCAN
When the CPU accesses the HCAN register and the operating frequency is 20 MHz or lower, the access counts
are the same as those of the MCU. However, when the operating frequency is higher than 20 MHz, one more
clock cycle is required for the CPU’s access counts.
8.2.7 Procedure for Applying the Power
When the user system is connected to the emulator, apply the power of the user system and then start the
emulator. However, depending on the user system, the emulator may not operate normally due to the leakage
current. In such cases, turn off the power switch of the emulator with the user system on, and restart the
emulator.
Vista de pagina 396
1 2 ... 392 393 394 395 396 397 398 399 400 401 402 ... 429 430

Comentarios a estos manuales

Sin comentarios