Renesas HS2378KCI01H Manual de usuario descargar pdf (Pagina 18)

Table 2.4 lists the combinations of conditions that can be set in the [Break condition] dialog box.

Table 2.4 Conditions Set in [Break condition] Dialog Box

Condition

Dialog Box

Address Bus

Condition

Data Condition

Read or Write

Condition

[Break condition 1]

[Break condition 2]

Note: O: Can be set by checking the radio button in the dialog box.

Table 2.5 lists the combinations of conditions that can be set by the BREAKCONDITION_SET

command.

Table 2.5 Conditions Set by BREAKCONDITION_SET Command

Condition

Channel

Address Bus

Condition

(<addropt> option)

Data Condition

(<dataopt> option)

Read or Write

Condition

(<r/wopt> option)

Break condition 1

Break condition 2

Note: O: Can be set by the BREAKCONDITION_SET command.

Notes on Setting the Break Condition:

1. When [Go to cursor], [Step In], [Step Over], or [Step Out] is selected, the settings of Break

Condition are disabled.

2. The settings of Break Condition are disabled when an instruction to which a BREAKPOINT

has been set is executed.

3. When step over function is used, the settings of BREAKPOINT and Break Condition are

disabled.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Sin comentarios

Renesas HS2378KCI01H Manual de usuario Pagina 18