Renesas M38000TL2-FPD Manual de usuario descargar pdf (Pagina 24)

( 24 / 48 )

3.2.7 Break-Event Output Connector

The break-event output cable (Figure 3.5) is an 8-pin cable and is included with the emulator

PC4701U package. It carries the break and event signals output from the break-event output con-

nector. Signals are output at TTL (74F244) level.

The break signal is output as a low level signal when break conditions are established. The event

signal is output at high level for the duration that the event (No. 1 to 6) designated as the break point

factor is maintained. Table 3.4 gives pin assignments of the break-event output connector.

Table 3.4 Pin assignments of break-event output connector

Figure 3.5 Break-event output cable

EV1

EV2

EV3

EV4

EV5

EV6

BRK∗

GND

EV1

EV2

EV3

EV4

EV5

EV6

BRK∗

GND

Pin No. I/O Signal Name Active Pin No. I/O Signal Name Active

1 Output EV1: EVENTOUT1 HIGH 5 Output EV5: EVENTOUT5 HIGH

2 Output EV2: EVENTOUT2 HIGH 6 Output EV6: EVENTOUT6 HIGH

3 Output EV3: EVENTOUT3 HIGH 7 Output BRK*: BRKOUT HIGH

4 Output EV4: EVENTOUT4 HIGH 8 - GND: GND HIGH

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 47 48

Sin comentarios

Renesas M38000TL2-FPD Manual de usuario Pagina 24