Renesas Emulation Pod M306H2T-RPD-E Información técnica descargar pdf (Pagina 28)

( 26 / 74 )

See "4.3 Self-check" (page 49).

Figure 2.4 Self-check procedure

(3) Downloading Firmware

The download procedure is given in Figure 2.3. Before attempting to download the firmware, check

that the emulator is connected to the host machine.

Figure 2.3 Firmware download procedure

(4) Self-check

To confirm that your emulation pod works properly, execute the self-check after downloading the

firmware. The self-check procedure is given in Figure 2.4.

See "4.2 Downloading Firmware"

(page 48).

See "3.8 Connecting the PC4701"

(page 41).

Connect the PC4701 and this product.

Within 2 seconds of turning the power ON, press the

system reset switch of the PC4701 and check it is in

maintenance mode.

Download the firmware using the emulator debugger.

End the emulator debugger and shut the power of the

PC4701 OFF.

Within 2 seconds of turning the power ON, press the

system reset switch of the PC4701 and check it is in

maintenance mode.

Push the system reset switch of the PC4701 again to start

the self-check.

After about 40 seconds, check that the self-check is

complete normally and shut off the PC4701.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Sin comentarios

Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 28