Renesas Emulation Pod M306H2T-RPD-E Información técnica descargar pdf (Pagina 36)

( 34 / 74 )

3.4 Switch Settings

Here follows explanations of the switches of the M306H3T3-RPD-E.

Tables 3.2 and 3.3 list how to set toggle switches SW1 to SW6 of the M306H3T3-PRT board (MCU-

dependent). Tables 3.4 and 3.5 list how to set jumper switches JP1 to JP10 on the M306H3T3-PRT

(MCU-dependent board).

(1) Toggle Switches SW1 to SW6 on the M306H3T3-PRT Board (MCU-dependent)

Table 3.2 Switch settings of the M306H3T3-RPD-E (1/4)

Signal Switch Setting Description

START

SW1

SW2

BYTE

Does not pull up/down pin START of the MCU.

Be sure to use this setting when the user

system is connected.

Pulls up pin START of the MCU with a resistance

of 10 kΩ. Xin-Xout is selected as an operation

clock after releasing reset.

Pulls down pin BYTE of the MCU with a resistance

of 33 kΩ. Be sure to use this setting when the user

system is not connected in 16-bit bus mode.

SW3

CNVSS

OPEN

Does not pull up/down pin BYTE of the MCU.

Be sure to use this setting when the user

system is connected.

Pulls up pin BYTE of the MCU with a resistance of

33 kΩ. Be sure to use this setting when the user

system is not connected in 8-bit bus mode.

Pulls down pin CNVSS of the MCU with a resistance

of 1 kΩ. Be sure to use this setting when the user

system is not connected in single-chip mode or

memory expansion mode.

Does not pull up/down pin CNVSS of the MCU.

Be sure to use this setting when the user

system is connected.

Pulls up pin CNVSS of the MCU with a resistance

of 1 kΩ. Be sure to use this setting when the user

system is not connected in microprocessor mode.

Pulls down pin START of the MCU with a resistance

of 10 kΩ. Xcin-Xcout is selected as an operation

clock after releasing reset.

(Factory-setting)

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Comentarios a estos manuales

Sin comentarios

Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 36

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Renesas Emulation Pod M306H2T-RPD-E