Renesas Emulation Pod M306H2T-RPD-E Información técnica descargar pdf (Pagina 68)

( 66 / 74 )

(2) Program Window is Not Displayed at Debugger Startup (Target Connected)

Table 6.2 Checkpoints of errors when starting up the emulator debugger (target connected)

Error

ERROR 16005:

Can't connect with the target.

ERROR 16211:

The version of M3T-PD30 and the firmware

on the target are not same.

ERROR 16215:

Cannot communicate with the debugging

monitor.

ERROR 16014:

Communication ERROR.

Can't accept data.

ERROR 16231:

There was sent undefined data from

PC4700.

Checkpoint

(1) Check the connection between the PC4701 and host

machine.

See the PC4701 User's Manual.

(2) Check that the PC4701 is powered on.

See the PC4701 User's Manual.

(3) Check that all switch settings on the rear of the PC4701

and interface cable settings of the emulator debugger

match.

See the PC4701 User's Manual and the emulator

debugger user's manual (online manual).

(1) Download the proper firmware.

See "4.2 Downloading Firmware" (page 48).

(2) Choose the proper MCU file in the Init dialog box.

See the emulator debugger user's manual (online

manual).

(3) Check that the descriptions in the MCU file are correct.

See "2.4 (1) Making an MCU File" (page 25).

(1) Check the connection between the PC4701 and this

product.

See "3.8 Connecting the PC4701" (page 41).

(2) Check the reset pin of the user system is held high.

See the MCU specifications.

(3) If the CNVSS is held high at startup, check that pins

HOLD* and RDY* are held high, too.

See the MCU specifications.

(4) Check that the oscillator circuit of the emulation pod is

oscillating properly.

See "3.3 Selecting Clock Supply and Replacing

Oscillator Circuit Boards" (page 30).

(1) Check that the oscillator circuit of the user system is

oscillating properly.

See "3.3 Selecting Clock Supply and Replacing

Oscillator Circuit Boards" (page 30).

(2) Check that the PC4701 LEDs at startup show normal

operation.

See "4.1 (3) LED Display When the Emulator Starts

Up Normally" (page 47).

Check that the emulator debugger has not been started

up without shutting down the PC4701.

See "IMPORTANT: Note on Quitting the Emulator

Debugger" (page 12).

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 74 75 76

Comentarios a estos manuales

Sin comentarios

Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Renesas Emulation Pod M306H2T-RPD-E