Renesas Emulation Pod M306H2T-RPD-E Información técnica descargar pdf (Pagina 66)

( 64 / 74 )

Chapter 6. Troubleshooting

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy troubles from when power to the emulator is activated until

the emulator debugger starts up. Check this while the user system is not connected. For the latest

FAQs visit the Renesas Tools Homepage.

http://www.renesas.com/eng/products/mpumcu/toolhp/faq/m16c/m16c_e.htm

Figure 6.1 Flowchart to remedy troubles

Not normal

Not normal or error displayed

Turning on the power of PC4701

Program window of emulator debugger displayed

PC4701 Front panel LEDs

Init dialog box of emulator

debugger displayed

1. Check emulator system connections.

See "3.8 Connecting the PC4701" (page 41).

2. Redownload the firmware.

See "4.2 Downloading Firmware" (page 48).

3. Restart the PC4701 system.

1. Check the operating environment etc. of the emulator debugger.

See the emulator debugger user's manual (online manual).

2. Reinstall the emulator debugger.

Normal

Error displayed

See "6.2 (2) Program Window is Not Displayed at Debugger

Startup (Target Connected)" (page 66).

See "6.2 (3) Program Window is Not Displayed at Debugger

Startup (Target Not Connected)" (page 67).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 75 76

Sin comentarios

Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 66