Renesas Emulator System SH7362 Manual de usuario descargar pdf (Pagina 82)

E8a Emulator User's Manual 6. Tutorial

R20UT0541EJ0601 Rev.6.01 Page 82 of 124

Aug 25, 2011

6.5 Checking the Operation of RAM

Check that RAM is operating correctly.

Display and edit the contents of the memory in the [Memory] window to check that the memory is operating correctly.

Note: The memory can be installed on the board in some microcomputers. In this case, however, the above way of

checking the operation of memory may be inadequate. It is recommended that a program for checking the memory

be created.

Select [Memory…] from the [CPU] submenu of the [View] menu and enter the RAM address in the [Display Address]

edit box. Here, enter ’0480’. Then, enter ‘0000’ and ’FFFF’ in the [Scroll Start Address] and [Scroll End Address] edit

boxes, respectively.

Figure 6.2 [Display Address] Dialog Box

Note: The settings of the RAM area differ depending on the product. For details, refer to the hardware manual.

Click the [OK] button. The [Memory] window is displayed and shows the specified memory area.

Figure 6.3 [Memory] Window

Double-clicking on the data area in the Memory Window allows you to change the values. Also, you can directly edit the

data at your cursor point without double-clicking it.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 123 124

Sin comentarios

Renesas Emulator System SH7362 Manual de usuario Pagina 82