Renesas M3062PT2-EPB Manual de usuario descargar pdf (Pagina 12)

M3062PT2-EPB User’s Manual Terminology

R20UT0211EJ0300 Aug 16, 2012 Page 12 of 104

Rev.3.00

Terminology

Some specific words used in this user's manual are defined below.

Emulator system

This means an emulator system built around the PC7501 emulator. The PC7501 emulator system is configured with an

emulator main unit, emulation probe, host machine and the integrated development environment High-performance Embedded

Workshop.

Emulator main unit (Hereafter PC7501)

This means an emulator main unit for M16C Family.

Emulation probe

This means the emulation probe (this product) for the M16C/60 Series M16C/62P and M16C/30 Series M16C/30P Groups

MCUs.

Emulator debugger

This means a software tool that is started up from the High-performance Embedded Workshop, and controls the PC7501 and

this product and enables debugging.

Integrated development environment High-performance Embedded Workshop

This tool provides powerful support for the development of embedded applications for Renesas microcomputers. It has an

emulator debugger function allowing for the PC7501 and the emulation probe to be controlled from the host machine via an

interface. Furthermore, it permits a range of operations from editing a project to building and debugging it to be performed

within the same application. In addition, it supports version management.

Firmware

Program that analyzes contents of communication with the emulator debugger and controls the emulator hardware. This

program is installed in the flash memory in the emulator main unit. This program is downloadable from the emulator debugger

to upgrade the firmware or to support other MCUs.

Host machine

This means a personal computer used to control the PC7501 and emulation probe.

Software break

A software break is a function to break the program before the system executes an instruction at the specified address. The

instruction at the preset address will not be executed.

Hardware break

A hardware break is a function to break the program when the system detects a write/read of data to/from memory or a

leading/trailing edge of the signal entered from the external trace cable. The former break function is called address break; and

the latter break function is called trigger break. While the instruction at the address where the software break is set is not

executed, a hardware break is performed after the specified instruction is executed.

Target MCU

This means the MCU to be debugged.

User system

This means a user's application system in which the MCU to be debugged is used.

User program

This means the program to be debugged.

Evaluation MCU

This means the MCU mounted on the emulator which is operated in a dedicated mode for use with tools.

This symbol indicates that a signal is active-low (e.g. RESET#).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Comentarios a estos manuales

Sin comentarios

Renesas M3062PT2-EPB Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Renesas M3062PT2-EPB