Renesas SuperH SH7280 Series Manual de usuario descargar pdf (Pagina 102)

8.2. Stand-alone Initialization

You can initialize data that is stored in the S550-SFWv3 internal memory on unit basis for security purposes.

The followings are the procedures for initialization.

*For initialized settings (factory settings), see “9.6 Initialized Settings (factory setting) List”.

*Initialization takes 1 to 2 minutes.

① Connect the S550-SFWv3 main unit and target board

・ Connect S550-SFWv3 and the target board with the target connecting cable.

*For connection in stand-alone mode, see “4.2 Connection for Stand-alone Programming / Stand-alone Initializing”.

② Power ON

・ Turn on the target board.

③ Confirm S550-SFWv3 start up

・ For the LED and buzzer status at the startup, see “9.2 LED Status List” and “9.3 Buzzer Sound List”.

④ Start Initializing

・ Press the “START” switch and hold it for 5 seconds to start initializing.

・ When initialization is started, all LEDs will be turned off, center display will be off and a series of short beeps

(“pip, pip, pip, pip...) sounds.

⑤ Initializing complete

・ After a beep “peep” sounds once, ”_”,”_” is displayed on the center display when initializing is complete.

Serial Flash Programmer[S550-SFWv3] Operation Manual 101

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 119 120

Sin comentarios

Renesas SuperH SH7280 Series Manual de usuario Pagina 102