Renesas SuperH SH7280 Series Manual de usuario descargar pdf (Pagina 107)

8.3.6. Data Switch Display

With the “Multi Data Mode”, you can select programming data on S550-SFWv3. Following shows how to select

the data.

*When there is no data downloaded to the internal memory, the display does not change to “Data Switch Display Mode”. Also, when the

S550-SFWv3 main unit is in energy saving mode, the display does not change to “Data Switch Display Mode”

① Move to “Data Switch Display Mode”

・ When center display is in the “Error Information Display Mode”, press the “FUNC” switch on

S550-SFWv3 once, and ”S.”,” P.” appear on the center display. Within 3 seconds after ”S.”,”P.” are

displayed on the center display, press the “START” switch on S550-SFWv3 once, then you can select data.

② Switch data

・ Press the “FUNC” switch on S550-SFWv3 and “P”,”1.” Through “P”,”4.” appear, you can switch data.

* Selected data is displayed initially.

*When there is no operation for 3 seconds after “P”,”1.” through “P”,”4.” are displayed, the center display goes back to the

default screen.

③ Exit “Data Switch Display Mode”

・ Press the “START” switch on S550-SFWv3 once to select the data and go back to the default screen.

If there is no operation for 3 seconds, the data is not selected and the screen goes back to the default screen.

* When a data is selected, buzzer sounds.

Serial Flash Programmer[S550-SFWv3] Operation Manual 106

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 119 120

Sin comentarios

Renesas SuperH SH7280 Series Manual de usuario Pagina 107