Renesas SuperH SH7280 Series Manual de usuario descargar pdf (Pagina 19)

 (When supplying voltage to the target board from S550-SFWv3 - Multi CH Mode)

USB cable

SFWv3 control

software

(OS: Windows 7(32bit/64bit),

Vista, XP, 2000)

AC power plug

Target connection cable

Your target

board

S550-SFWv3

Vcc

* Turning ON/OFF the power of S550-SFWv3 is done by plugging/unplugging the USB cable.

* Do not unplug the USB cable during the communication with the control software.

* The voltage supplied to the target can be selected from 5V plus/minus 5% or 3.3V plus/minus 5%.

* The voltage is supplied to the target board while programming only.

* Please use self-power when using USB hub.

* Action might become unstable as that the power supply falls down. In that case, please supply voltage to the

target board by using an external power supply.

Serial Flash Programmer[S550-SFWv3] Operation Manual 18

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 119 120

Sin comentarios

Renesas SuperH SH7280 Series Manual de usuario Pagina 19