Renesas SuperH SH7600 Series Manual de usuario descargar pdf (Pagina 16)

11. Illegal Instructions

If illegal instructions are executed by STEP-type commands, the emulator cannot go to the

next program counter.

12. Interrupts

While the emulator is executing the user program, any interrupt to the SH7616 can be used.

While the emulator is waiting for command input, interrupts are not processed. However, if an

edge sensitive interrupt occurs in command input wait state, the emulator holds the interrupt

and executes the interrupt processing routine when the GO command is entered.

13. When accessing the reserved memory area, use the [Memory] window; do not use other

windows.

2.2 Specific Functions for the Emulator when Using the SH7616

The SH7616 does not support the following functions:

• MMU-related functions (The SH7616 does not mount the MMU.)

 VPMAP-related command

 Virtual and Physical specification in the [Configuration] window

 Virtual and Physical specification on the command-line function

 Virtual and Physical specification in the [Breakpoint] window

 LDTLB instruction execution break function

 MEMORYAREA_SET command

• AUD trace function

• Internal I/O access break function

• UBC_MODE command (The UBC function cannot be used while the emulator is being used.)

• UBC_MODE specification in the [Configuration] window or on the command line

• Profiler function

• Performance measurement function

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Sin comentarios

Renesas SuperH SH7600 Series Manual de usuario Pagina 16