Renesas SuperH SH7600 Series Manual de usuario descargar pdf (Pagina 9)

Pin No. Signal

Note

11*

10, 12,

and 13

14*

TCK

/TRST

TDO

N.C.

TMS

TDI

/RESETP

N.C.

(GND)

UVCC

GND

Input/

Output*

Input

Output

Input

Output

GND

Output

Pin 1 mark

Notes:

1. Input to or output from the user system.

2. The slash (/) means that the signal is active-low.

3. The emulator monitors the GND signal of the user system and

detects whether or not the user system is connected.

25.0

23.0

6 x 2.54 = 15.24

(2.54)

0.45

Pin 1

Pin 8

Pin 7

Pin 14

Pin 1 mark

H-UDI port connector

(top view)

H-UDI port connector

(top view)

4. If the VccQ pin is not connected to the UVCC, the I/O voltage

of the user system interface will be fixed to 3.3 V.

5. The /ASEMD0 pin must be 0 when the emulator is connected

and 1 when the emulator is not connected, respectively.

(1) When the emulator is used: /ASEMD0 = 0 (ASE mode)

(2) When the emulator is not used: /ASEMD0 = 1 (normal mode)

To allow the /ASEMD0 pin to be GND by connecting the user system

interface cable, connect pin 9 directly to the /ASEMD0 pin. Do not ground the pin.

Unit: mm

SH7616 Pin No.

Figure 1.1 Pin Assignments of the H-UDI Port Connector (14 Pins)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

Comentarios a estos manuales

Sin comentarios

Renesas SuperH SH7600 Series Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Renesas SuperH SH7600 Series