Renesas Emulation Pod M306H2T-RPD-E Información técnica Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 68
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
M306H5T3-RPD-E User’s Manual 1. Outline
REJ10J0866-0100Z Rev.1.00 Dec.16, 2004
Page 18 of 66
1.4 Specifications
Tables 1.5 lists the specifications of the M306H5T3-RPD-E.
Table 1.5 M306H5T3-RPD-E specification
Item Desctiption
Applicable MCU M16C/6H Group M306H5
Evaluation MCU M306H3FCFP and M306H5MG-002FP (1 piece each)
Usable mode
Single-chip mode
Memory expansion mode
Microprocessor mode
Emulation Memory 1MB
Maximum operating frequency 16MHz
Applicable power supply
VCC2=4.0V--5.5V, VCC1=3.0V--VCC2 (Xin: when operating without
division)
VCC2=2.9V--5.5V, VCC1=2.9V--VCC2 (Xin: when operating in a
divide-by-16 or 8-mode)
VCC2=2.0V--5.5V, VCC1=2.0V--VCC2 (Xcin when operating)
*
VCC2=2.0V--2.6V operates only in low power dissipation mode.
XIN-XOUT
Internal oscillator circuit board (OSC-3)
Switchable to external oscillator input
Clock supply
X
CIN-XCOUT
Internal oscillator circuit (fixed 32.768kHz)
Switchable to external oscillator input
Basic debugging functions
- Download
- Software break (max. 64 points)
- Program execution/stop (allows free-run execution supporting software
breaks)
- Memory reference/setting (reference/setting C-variables, run-time
execution)
- Register reference/setting
- Disassemble display
- C-level debugging, etc.
Real-time trace function
- 32K-cycle bus information recordable
(Bus, external trigger, time stamp)
- 5 trace modes supported (Break/Before/About/After/Full)
- Can be recorded ON/OFF by events
Real-time RAM monitor function
- 1,024 bytes
- Data/last access result
Hardware break function 6 points (Bus detection, interrupt, external trace signal)
Execution time measurement function
Time between program start and stop
Maximum/minimum/average execution time and pass count of specified
four zones.
Count clock: Equal to MCU Clock or 16 MHz
C0 coverage 256KB
Event output Break x1, Event x6
External trigger input TTL level x8
Host machine interface
Dedicated parallel (PC4701HS)
LPT parallel (PC4701M/PC4701U)
Serial (PC4701HS/PC4701M)
USB (PC4701U)
LAN (PC4701HS/PC4701U)
Power supply to emulator AC100V--120V, AC200--240V (50/60Hz)
Connection to user system
(see "2.9 Connecting the User System" on
page 35)
Converter board for connecting a 116-pin 0.65-mm-pitch (116P6A-A):
M306H2T-PTC (included)
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 67 68

Comentarios a estos manuales

Sin comentarios