
E1/E20 Emulator Outline
R20UT0398EJ0400 Rev.4.00 Page 13 of 39
May 16, 2014
1.4. Specifications
Table 1.3 lists the specifications of the E1 or E20 emulator.
Table 1.3 Specifications of the E1 or E20 emulator
Emulator Type E1 Emulator
Type name: R0E000010KCE00
E20 Emulator
Type name: R0E000200KCT00
USB 2.0 (high speed/ full speed)
User Interface 14-pin connector
7614-6002 [Sumitomo 3M Limited]
38-pin connector
2-5767004-2 [Tyco Electronics Japan
Power Voltage for
USB-bus power supply (VBUS 4.5 V, min / 500 mA, min)
Power supply for
the target MCU
Supplied from the user system or
Supplied from the E1 emulator (200 mA,
max *)
Supplied from the user system
External dimension
109.4 mm × 53.2 mm × 18.6 mm 114.9 mm × 74.2 mm × 19.2 mm
5 to 35°C (no condensation)
-10 to 60°C (no condensation)
EMC EU: EN 55022 Class A, EN 55024
Note: If you can supply 500mA from USB VBUS
Comentarios a estos manuales