Renesas User System Interface Board HS7047ECH61H Manual de usuario descargar pdf (Pagina 209)

123

4.16.5 Function Calls

This mechanism is only used to collect trace information on the function calls.

(1) Make the setting so that a break occurs at the address on the line that has ‘p_sam->s0=a[0];’ within the

tutorial function (H’000010A4 in this example) (for details, refer to section 4.15.1, Software Break

Function).

(2) Select [Reset Go] from the [Debug] menu. Execution stops when the break condition is satisfied, and the

[Trace] window then displays the trace information.

(3) Select [Function Call…] from the popup menu displayed by clicking the right-hand mouse button on the

[Trace] window. The [Function Call Display] dialog box will be displayed.

Figure 4.50 [Function Call Display] Dialog Box

(4) Click the [Enable] radio button and then the [OK] button. Only the information on function calls is now

displayed in the [Trace] window.

Figure 4.51 [Trace] Window (Function Calls)

(5) To return the display in the [Trace] window to its previous state, follow the procedure in (3) to display the

[Function Call Display] dialog box. Click the [Disable] button and then the [OK] button.

(6) Delete the event points that have been set and clear the trace information. Clicking the right-hand mouse

button on the [Event] window displays a popup menu. Select [Delete All] from this menu to delete all the

event points that have been set. Clicking the right-hand mouse button on the [Trace] window displays a

further popup menu. Select [Clear] from this menu to clear the trace information.

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 242 243

Sin comentarios

Renesas User System Interface Board HS7047ECH61H Manual de usuario Pagina 209